How to use a Shark Steam Mop?
Steam will most likely cause minimal to no damage to the areas you choose to clean, unlike chemicals that do have chances to cause potential damage. This is where the shark steam mop comes in. Because of how useful it is, there are now many brands and types of shark steam mops that you can get in the market. Understanding how it works best and how you can maintain this tool will help you get the best results from it. To choose which kind you should buy, or if you already own one of your own but do not know exactly how to use it, this article is going to help you.
List of Page Contents
What is a shark steam mop?
Shark steam mops are a non-toxic way to clean in an effective way. The equipment uses steam to get rid of dirt and debris on your walls, floors, and carpets. Yes, just steam from water. It is quite impressive how it has proven to work better than other methods of cleaning many times. It eliminates the need to use harsh chemicals that can sometimes be dangerous to use in households or places with pets and children. It can make cleaning around the house and other places surprisingly easier.
How do you use it?
There are a few things you should check before you start using your mop. Firstly, make sure to check if the cord is properly plugged into the outlet or not. Another thing you should keep in mind is that you select the proper cleaning settings in the device depending on the surface you will be cleaning. After you turn it on, it starts producing the steam for cleaning in around 30 seconds. Most of the time the Low setting is used for surfaces that are more delicate or surfaces that require light cleaning or dusting. The Medium setting is the most commonly used setting. It gets rid of spots and dirt on sealed surfaces such as hardwood floors, stone, tile, and marble. The High setting is used for more deep cleaning purposes. It gets rid of dirt from surfaces that are harder to clean and have a lot of traffic.
You are going to have to wait for the shark steam mop to complete its heating cycle. After it is done, check if the steam is flowing when you pump the handle. Next, start cleaning your desired area by moving the mop in back and forth motions. Starting from the farthest side of the room is a good idea to avoid stepping on the clean portions and leaving footprints. Feel free to switch to the cleaner side of the mop once one side has collected a lot of dirt. Lastly, be mindful of the level of water in the tank. The mop will not be able to perform well without a sufficient amount of water. Too much water shouldn’t be filled either.
Shark steam mops work best on hard surfaces that are not vulnerable to moisture. It can also be used on sealed surfaces that have a protective layer.
How to use shark steam mops on hardwood floors?
Using shark steam mops for vinyl floors or hardwood floors is ideal as they don’t catch moisture. You can use the Low setting on your mop or the delicate dust setting to clean on hardwood surfaces to avoid damaging sensitive wooden flooring. It is a good idea to choose a proper material of mop cloth we suggest one with a microfiber pad. This will leave the floor dry after cleaning and will also have a high level of absorption. It is not advisable to use cleaning chemicals of any sort as that can damage the flooring.
How to maintain a shark steam mop?
Wait for the mop to cool down for around 3 minutes after you are done using it. When storing your mop, make sure the cleaning head of the mop is removed. A hanging position is recommended when you set it aside after using it. To avoid overheating the equipment, do not turn it on when the tank is empty. The cleaning pad can be washed in a washing machine with a mild detergent.
Conclusion:
A shark steam mop is a relatively easier way to do the cleaning. It can be used in various ways on many different surfaces in a safer manner. It is a useful tool that you should definitely consider owning. We hope this article will help you navigate it.
