Author Archives: moppull

How often should you mop, clean mop and change Mop?

Are You planning to clean your mop? Well, it is indeed a great idea since you know that it is one of the dirtiest items in the house. Swabs can get dirty after you use it several times.

How to clean a mop?

The best method to clean your mop is to rinse and soak after every use. First, rinse your mop with running water. Then dip it in the bleach and water mixture. You can decide the volume of the mix depending on the size of your broom. Soak it in around 15 minutes, rinse, and then hang it to dry. You could also expose it under the sun to speed up the drying process. Don’t use too many chemicals in the mixture because it will wear out your mop head. Make sure to dry your mop first before storing it.

How can I effectively clean a sponge mop?

Sponge mop is wearable for multiple times. It is essential to keep it clean after using it. The old dirt and debris won’t be good for your sponge mop if you leave them that way. The best way to clean sponge mop is by using a mild detergent. Some people use bleach product without knowing the effect. Both bleach and ammonia are toxic gas. You don’t want to use them for cleaning your sponge mop. Instead, you could use either mild dish detergent or gentle floor detergent.

First things first, fill the bucket with hot water. Add enough dish detergent or mild floor detergent to the boiling water. The proportion is relative. Don’t add too much soap. Soak your sponge mop head into the soapy hot water. Press the sponge to release the dirt. Note to take, don’t put the water back to the bucket. Release the dirty bucket to throw them out. You could wring out the sponge mop head and repeat the process until you release all of the dirt and grimes.

How often should you change your mop head?

Depending on the materials of your mop head, you must replace your mop heads every 2 or 3 months. But that also depends on how often you use the mop and how large the areas to cover on a daily basis. The best way to see the condition of the broom is when you think that the swabs cannot give the same result of cleaning, it is probably the right time to dump it. If you are in doubt, you can replace your current mop head with the new one. After all, it is not a significant investment for you.

How often should you mop?

If you are living alone or just the two of you, your areas might not be high in traffic. But in some high-traffic areas, you will need to mop them frequently. High traffic areas can be the bathrooms, kitchen, hallways, and entryways. High traffic areas must be mopped at least once a week or more.

If some rooms are not frequently used, there is no need to mop them every week. Instead, you could mop them twice per two weeks.

How to Clean various type Mop Head?

Cleaning your floors won’t be effective without a cleaner mop. Keeping your mop clean is the key to maintain the quality of floors cleanliness. Many times, the homeowners often overlook the fact that dirty mops can be the causes of stubborn dirtiness. Meanwhile, it is easy and simple to clean your mop head. Depending on the type of your broom, you could put it in the washing machine, dishwasher, or by bare hands.

How to clean a string mop?

string mopString mop needs to be cleaned routinely to maximize its function and performance. You will wash it after using the mop. Rinse the head with hot water to kill the bacteria and germs. Then you will want to wring it as hard as you can to drain the most portions of the water. Let it dry in the ventilated area, or outdoor. If possible, let it dry under the sun.

If the specks of dirt are too piling up, you could use the other way. Soak your mop in a water and cleaning solution mixture. Add bleach to the gallon to the mix if you notice the awful smell.

Rinse the mops with hot water. Cold water is fine, but you can see the vast difference when you use hot water to clean your string mop.

How to wash spin mop head in the washing machine?

spin mopAny washing machine will be a great choice to wash your spin mop, only if you do it the right way. Chances are there will be mold and bacteria left on the broom. So, you will want to take care of them first by rinsing your mop with hot water. Rinse it twice or more if necessary. Use mild detergent. Only use bleach if you think that the materials of the mop head are too dirty.

How to clean microfiber mop heads?

Microfiber mopPresuming that your mop head is microfiber, you will want to use a mild detergent with hot water to clean the dust and dirt. Microfiber is as delicate as clothes so that you will want to set the low heat. In the washing machine, you could place the device with a regular cycle. Don’t use jeans or harder mode. Also, use mild detergent and little amount of bleach. Too much bleach can degrade the materials.

Don’t dry your microfiber mop head under the high heat. Instead, you could put it in the well-ventilated room, or outdoor under the sun.

You can also wash the microfiber mop head by hands if your washing machine is too harsh. Use the mild detergent and soft bristled brush if there are some hard dirt.

Whether you are using washing machine or hands, don’t dry your microfiber mop head under hard pressure.

How to clean a sponge mop head?

sponge mopFor some people, it is a bit tricky to clean the sponge mop head. But it is easy if you know how to do it. Add mild detergent to the water. Or you could also use mild floor detergent with water. Soak your sponge mop head into the soapy water. Press the sponge many times to release the dirt to the water mixture. Use the wrong mechanism of the mop. If necessary, you could repeat the process with new water mixture. Place some tarps on your yard, or other outdoor spaces. Lay your mop head on the tarp under the sunlight. Leave it to dry.

What is the perfect way to mop a floor?

Mopping floor sounds a simple thing to do. But if you have zero experience in doing household tasks, it might be a daunting one for you. Consider reading these tips so that you will be more than ready when someone gives you this task.

How to mop a tile floor?

Tile floor cleaningChances are you have ceramic tile floors in your doorways, entryways, kitchen, or somewhere else. You will want to clean the floor often. Don’t let the dust piling up on your floor. The best way to mop your tile floor is doing it frequently. So, a good trick is to store your mop nearby the cleaning space.

You don’t want to wet your floor until you remove the dirt and debris first. If you don’t have a vacuum, you could sweep it manually with a broom. If you have smaller or medium space, it shouldn’t be a problem for you. But please consider purchasing vacuum if you have a larger area to cover.

Mop the floor back and forth. Assess the room and ensure you have the exit way. You don’t want to step your foot in the clean floor again.

The cleaning should work with the mild detergent or soap sold on the market. The key here is not using too much detergent. Use less soap but more frequent in cleaning. Also, the wet floor should be dried soon after you finish the cleaning. Free your time up and do it routinely.

How to clean sticky tile floors?

Sticky tile floorsSticky tile floors have been nightmare to every homeowner. But don’t worry, with proper tools and solutions you can manage the sticky stains and spills easily. The correct method to clean the sticky floors is to use the effective solutions so that you won’t force your mop to scratch the floors.

We’d suggest you use a mop with spray and warm water. The warm water will help in to remove the sticky spot faster. Some people use vinegar solution that they can take from the kitchen. But if you don’t like the smell, the answer from the top brand you can find on the market will be excellent.

If there is stubborn dirt, consider using a mildly abrasive net scrubber to remove them. Don’t use harsh, caustic scrubber since it will scratch your floor.

How to clean porcelain tile floors?

Porcelain tile floorsThe key for a clean porcelain tile floors is to clean it regularly and appropriately. It is easy to motivate yourself to do this on a routine basis. Doing it the right way is something different. Usually, you could clean your porcelain tile twice a week. But you need more frequent times if you are living in a tropical area. The best kind of mop for porcelain floor is models with sponge or microfiber cloth.

To clean porcelain tile floors, you will want to remove the dirt and dust by vacuuming and sweeping the floors. Divide the sections so that you will have your exit way. Use a mild cleanser and let it soak into the tile for few minutes. Make sure your mop is a little bit too wet to prevent the floor from drying. Use a soft-bristle brush to scrub the stubborn dirt and spills.

Then you will need to wipe away the dirty cleaning solution. Rinse the flooring area with warm water. And dry it with a dry mop with microfiber cloth or towel. That’s it.

How to Remove Spin Mop Head?

To keep the house clean and tidy, the Spin mop is one of the most popular household tools that many homeowners are using. There Are some opportunities in which you can use to clean your house with the most modern spin mop that you have. However, after few uses from the deep clean of your home, your broom can get dirty and need to be cleaned. If the mop is dirty, then your effort in cleaning your house will come to waste. The only choice you have is to wash the mop head or replace it with the new one.

In case your mop head is still okay to use, you could remove the head and wash it. Before washing the head, you will want to remove the mop head properly to avoid the malfunction or broken mop. For the spin mop, you need to remove the head first before washing it. Each model from a different manufacturer has different markings of twists and turn on the head. That’s why opening the mop can be challenging if you never did this before.

First, you can do to look at the moving patter at the head of the mop. The branded spin mop should have the manual that you can read. In the manual, there will be the head removing instruction. Many times, people are overlooking this aspect so that they don’t know what’s wrong with their jammed or broken spin head. So, always play by the book.

In case you don’t find the manual, you could read the instruction given in the official site of the spin mop model. Alternatively, you could reach their customer service to help you with the method.

By using your hands, you could twist the spin mop head gently. If it sticks or doesn’t follow your twist, you might do it in the wrong direction. There’s a good chance that you turn to the right direction the first time you try it. The point is that you need to see the twist, and then you could pull the head from the mop. Pull it gently from the shaft, and you are good to go.

Keep in mind that some models need a stronger force to release their mop head. If the manual that you read says so, don’t hesitate to use your power because it won’t hamper the product. Pull the head gently, and you are just doing great.

Sometimes, the mop head sticks to the attachment. You will also want to remove the attachment before washing your mop spin head.

Keep in mind that not all heads are machine washable. Again, you will need to read the official instructions from the manufacturer for this.

If you are washing with the machine, make sure to remove any extra attachment from the head. The attachment can be wire or rubbing material. If you neglect this, there’s a chance the head can damage your washing machine. Removing the enclosure is also easy to do. With few attempts, it will become your nature. Thanks for reading and hope this tip helps you.

How to Use A Mop Effectively

Mopping is one of cleaning activity that you will need to do at least once in your life. It seems pretty t of easy, but actually, it is kind of surprising how a lot of people might have done it in wrong way. Your quality of mopping will determine the durability of your flooring. If you did not do it in the correct way, you will only tire yourself without really removing all dirt from the floor. So here are three things that you need know to use a mop effectively.

  1. Learning about the floor material

How to Use A Mop EffectivelyA different material of flooring requires different treatment. If you use a wrong cleaning agent, it can bring damages to the material, such as losing the original color or texture. Wooden, linoleum and stone flooring will not stand strong chemical, therefore using ammonia, vinegar, or oil-based cleaners will leave residue and damage the surface. Tile is more durable than those three materials, so you can use vinegar and disinfectant to do a more thorough cleaning once every few months. It is best to use the product that is recommended when you first buy the material, or simply use mild dish soap if you can afford the recommended one.

  1. Choosing the right mop for your floor

There are several types of mops that you can find in the cleaning department and actually, each of it serves a different purpose. You need to know how to use it properly to get the best result of your cleaning.

  • Sponge mops are one of the most common household mops because it has a great absorbance and very easy to wring out. Using this kind of mop will prevent you make the floor too wet and reach the space under your furniture. However, this kind of mop is difficult to clean and do not work good enough with corners and edges.
  • String mops are also commonly used for household needs and actually pretty easy to use. People love using this mop because it is light, easy to clean off and can reach edges and corner pretty well. However, it can leave plenty of water residue and not as durable as sponge mops.
  • Strip mops are really good to cover a large area, therefore people usually use it for commercial or public places. It requires more strength to use than the other two but can do the job pretty fast. You will need to wring it out completely before applying it on the floor to avoid making the floor to wet and clean it out thoroughly before storing it since the dirt usually stuck on its strings.
  • Cloth mops require more effort than the other type of mops but can be the cleanest if you use it right. It is best to use in a small area, such as a dormitory room or apartment. Using cloth mop allows you to make sure there is no dirt and stain left and also measure the wetness depends on what you need.
  1. Preparing the floor before mopping

People often make mistake by doing half job on sweeping because they think that they are going to mop it anyway. Sweeping the floor is really important because mopping cannot pick up debris and crumbs, such as fallen hairs and food crumbs. You will need a good broom to pick all those debris and the mop will take care of the stain and dust. You also need to remove all flooring items, such as rugs, mat, or carpet before you mop or it can create a dust line that will reveal the area that you did not clean.

Top 10 Mopping Tips and Methods to Make Your Floors Spic and Span

Once you’ve installed the floor tiles, you will want to maintain the beauty of your house. The floors are the areas that will need daily maintenance because these are where the occupants contribute to the most traffic on a daily basis. As we know, keeping our home is very important. You will need the mop to clean your floors from the stubborn dirt. Everybody can do the mopping. However, did you know that there are tricks to maximize the result of your activity? Here are the top 10 mopping tips and methods to make your floors spic and span.

Dust the floor in advance

Sweeping the floor before mopping it will save you a lot from hassles. By cleaning your floor in advance, you will remove the dust, debris, and crumbs, giving good passage for the mopping. Not to mention that it will prevent the debris to scratch your floor.

Divide the area of cleaning

It is essential if you have a larger area to mop. When you divide the floor into individual segments, you will quickly focus on the affected part. Then it will save your time a lot because you don’t have to repeat the process in the other section.

Getting informed on the cleaning product

Each product has a different measurement and methods. Make sure you read the product’s label first before using it. Consider using the cleaner in moderate portion.

Leave it to dry

Leave the mopped area to dry. You can open the windows to let the heat come in to wipe your floor quickly. If necessary, put the wet-floor-sign on the mopped area if there are some stubborn occupants in your property.

Declutter the floor

Many people overlook this aspect. When you declutter the basement, it will make you easier to clean the floor in one go. Consider to remove some furniture like chairs, tables, rugs, etc. don’t let these stuff get in your way when you clean your floor.

Keep your mop clean

There is no point if you use the dirty mop because of the previous area cleaning. Depending on the level of the dirtiness, you will want to rinse and wring out your mop routinely. This will keep your room cleaned and ready to mop the floor. It will also prevent the dirt from spreading on the other stories.

Use clean water

I know some of us to tend to use the already dirty water because we are too lazy to refill the bucket with the clean water. In the end, it will make your floor dirtier. Dirty water won’t get your floor cleaner. Consider always to use clean water.

Focus on high traffic areas first

You could focus your cleaning in the high traffic areas first like the kitchen, doorsteps, etc. Mopping routinely in these areas will keep your home free from stains, odors, and smells.

Maintain your mop

Always maintain your mop. Soak it in the cleaner and wash it by clean water. Hang it to dry in the laundry room or cleaning room. Using your swab correctly will also improve its longevity.

Don’t use a poor-quality mop

You might want to save some money by purchasing cheap mop. However, it will waste your time and effort if it is poor in quality. Choose an all-in-one mop with disposable cleaning pads. The popular brands always provide the replacements in the official store. It will improve your home cleaning solution.

Know the best hacks about Mop

If you want to make your home as your sanctuary, you will want to maintain its cleanliness and tidiness on a daily basis. Cleaning your floor requires proper equipment which can help you to clean the dust and particles faster. In most modern premises, it is sensible to use the microfiber floor mop since it is the most working and useful tool that can help you clean the house without any hassles. For those who are not familiar with the new mops, here are ten things you must know about them.

Dust mop and wet mop:

Dust mop and wet mopWhen you shop around, you will see these options. Well, take them both! You will need them to maintain your house cleanliness. Dry mop or dust mop is useful to remove dust, sand, soil, crumbs, and any other specks of dirt. A wet mop is for cleaning liquids.

Microfiber mops save you a lot:

Microfiber mops save you a lotMicrofiber is the best material for a mop so far. It holds the dirt until we wash it with the water. It can hold larger quantities of water than other materials. Microfiber can also stand 500 times of repeat process without losing its quality. Imagine how much time you have with your microfiber mop before replacing the pad.

Clean in details:

Most traditional mops which use cotton as the pad’s material do not meticulously clean the little dirt. Sometimes, you need to redo the mopping. However, new mops come with microfiber cloth pads which can clean both little dirt and large debris.

The perfect dryness:

perfect dryness of mopThe new mops also give you the ability to absorb the excessive cleaning water on the floor, making the dryness quicker. It will save your time and effort when maintaining the cleanliness of your house.
Most new mops have replaceable pads. What does it mean? Longevity! That means you won’t have to purchase new mop any sooner because all you need to do is just replacing the existing pads with the new one, and your mop is ready to use.

Efficient and effective:

Efficient and effective mopThe new mops come with the ergonomic design so that it is easier to use it anywhere, anytime. Its ergonomic handle improve the efficiency so that you won’t feel exhausted when mopping your floors.

Dual bucket systems:

Dual bucket systems mopThe traditional way of mopping is by using one bucket. It puts the dirt from the floor into the bucket and then back to the level. Many people are not aware of this. It is more useful to use dual bucket systems. It will prevent the contamination of your degree.

Steam Mops:

Steam MopsSteam mop cleaner comes as the solution for more rigorous works. The steam mop is beneficial for sanitizing, disinfection, and cleaning more complex surfaces. It is more effective than the usual modern mop but can come more expensive because of the anti-bacterial properties to purchase.

Fresh and soothing scent:

Fresh and soothing scent mopDid you know that you could use cleaners with aromas that you can choose? By using the mops, you will have the experience everytime you come home.

Mop sizes:

Many people do not wear the right size of the mop. The mop is like shoes. You will want to choose one which is suitable for you. When shopping around, consider looking at the measurement details. Choose one with an appropriate height. You won’t need to worry. There is a mop for everyone.